Pelatihan Penerapan Standar K3 untuk Meningkatkan Keamanan dan Kesehatan Kerja pada UMKM Pengelasan di Desa Kampar

Adi Febrianton; Purnama Irwan; Romiyadi Romiyadi; Indah Purnama Putri; Yudi Dwianda; Widya Sinta Mustika

doi:10.59061/abdimasterapan.v3i2.1254

Authors

Adi Febrianton Politeknik Kampar
Purnama Irwan Politeknik Kampar
Romiyadi Romiyadi Politeknik Kampar
Indah Purnama Putri Politeknik Kampar
Yudi Dwianda Politeknik Kampar
Widya Sinta Mustika Politeknik Kampar

DOI:

https://doi.org/10.59061/abdimasterapan.v3i2.1254

Keywords:

Occupational Safety, Occupational Health, welding, Helmets, UMKM

Abstract

Occupational safety and health (K3) is very important to be applied in small and medium industries. In addition to reducing the risk of work accidents, the implementation of K3 can also provide benefits for the industry, such as increasing productivity, maintaining the quality of work results, and creating a safe and comfortable work environment. Kampar Village, Kampa District, has five MSMEs engaged in welding. Based on the survey, almost all of these MSMEs have not implemented the implementation of K3 properly, especially due to the lack of employee awareness in implementing safe work behavior. The lack of employee knowledge about the principles of K3 is also the cause of low concern for occupational safety. In addition, MSMEs have not provided complete personal protective equipment (PPE), so the risk of work accidents is higher. Therefore, training related to the implementation of K3 standards is needed to improve employee welfare while supporting the progress of MSMEs. This training is given to MSME owners in Kampar Village, Kampa District, so that they are able to implement K3 standards consistently and sustainably in welding business activities.

References

Aslinda Anwar, Maklassa, D., & Nurinaya, N. (2024). The effect of occupational safety and health (K3) on the productivity of rubber tapping workers at PT London Sumatra (Lonsum) Indonesia Tbk, Balombessie Bulukumba Regency. International Journal of Economic Research and Financial Accounting (IJERFA), 2(3), 477–485. https://doi.org/10.55227/ijerfa.v2i3.82

Creswell, J. W., & Poth, C. N. (2023). Qualitative inquiry and research design: Choosing among five approaches (5th ed.). SAGE Publications.

Drs. Irzal, M. K. (2016). Dasar-dasar kesehatan & keselamatan kerja. Kesehatan Masyarakat.

Hidayah, P., Herniwanti, & Kamali Zaman, M. (2022). Implementation of occupational safety and health (K3) inspection as a work accident prevention effort in palm oil factory, Kampar Regency, Riau Province. Science Midwifery, 10(3), 2215–2224. https://doi.org/10.35335/midwifery.v10i3.641

Krisyanti, N., Budiono, N. D., & Pasca. (2023). Pengaruh budaya keselamatan dan kesehatan kerja (K3) terhadap unsafe action pada pekerja di PT X Divisi Fabrikasi Baja. Kesehatan Ilmiah Indonesia, 9(2), 1–6.

Maddeppungeng, A., Asyiah, S., Intari, D. E., Putra, M. A., & Setiawati, D. N. (2023). OHS, Indonesia building construction, risk management. Jurnal Teknik Sipil, 12(2). http://dx.doi.org/10.36055/fondasi

Matantu, I. W., Tewal, B., & Sepang, J. L. (2016). Analisis kesehatan dan keselamatan kerja (K3), evaluasi kinerja, dan pembagian kerja serta pengaruhnya terhadap prestasi kerja karyawan (Studi kasus pada PT PLN (Persero) Area Manado). Jurnal Berkala Ilmiah Efisiensi, 16(3), 156–167.

Moleong, L. J. (2021). Metodologi penelitian kualitatif. Remaja Rosdakarya.

Muhammad, M., & Marsuki, M. (2024). Implementation of an occupational safety and health management system (A study of the implementation of occupational safety and health at PT PLN Indonesia Power, Barru). Jurnal Penelitian Pendidikan IPA, 9(Special Issue), 850–858. https://doi.org/10.29303/jppipa.v9ispecialissue.6155

Nurhayati, D., & Rachim, F. (2022). Efisiensi pelayanan pelabuhan dalam rantai pasok maritim nasional. Jurnal Logistik dan Kepelabuhanan, 8(4), 120–131.

Prasetyo, A. D., & Wibowo, M. A. (2023). Analisis faktor-faktor yang mempengaruhi penerapan keselamatan dan kesehatan kerja (K3) pada proyek konstruksi gedung. Jurnal Teknik Industri dan Manajemen, 10(1), 45–54. https://doi.org/10.33510/jtim.v10i1.2519

Rahmantiyoko, A., Sunarmi, S., Rahmah, K., Slamet, D., & Keselamatan dan Keamanan Kerja Laboratorium Team. (2019). Keselamatan dan keamanan kerja laboratorium. IPTEK Journal of Proceedings Series, 4, 36–38.

Ramadhani, T. N., & Hasibuan, A. (2024). Pengaruh penerapan keselamatan dan kesehatan kerja (K3) terhadap kinerja pekerja konstruksi: Tinjauan literatur. Gudang Jurnal Multidisiplin Ilmu, 2(6), 550–555.

Sitorus, A. (2023). Strategi penguatan Indonesia sebagai poros maritim dunia. Penerbit Maritim Indonesia.

Yani, A. (2024). Efektivitas pelatihan keselamatan kerja di konstruksi dan peran manajemen dalam meningkatkan kepatuhan K3: Literatur review. Jurnal 5(2), 57–66.