Pemeriksaan Serta Pemeliharaan Pada Rel 1 Bay Saketi

Authors

  • Dede Eful Ginanjar Universitas Sultan Ageng Tirtayasa
  • Irwanto Irwanto Universitas Sultan Ageng Tirtayasa

DOI:

https://doi.org/10.59061/jentik.v2i2.673

Keywords:

inspection, maintenance, rail (busbar)

Abstract

This research aims to find out about the main substation, good rails (busbars) in the substation system, and inspection and maintenance of the 1 bay Saketi rail. The place and time for industrial practice is carried out at PT. PLN Persero ULTG Rangkasbitung Jl. Rawasari, West Rangkasbitung, District. Rangkasbitung District. Lebak, Banten Province. The implementation time is from 28 November to 28 December 2022 with 5 working days. In this research it was found that rails (busbars) require protection if used in open areas. This avoids a short circuit if a metal object falls on the positive or negative busbar. At one substation there are several types of busbar configurations, including: (1) single bus; (2) double bus-double breaker; (3) main and transfer buses; (4) double bus-single breaker; (5) ring bus; and (6) break and a half.

References

Arismunandar Artono. 2001. Teknik Tegangan Tinggi Jakarta. Pradnya Paramita.

Arnata Mohamad A. 2019. Analisis Pengujian Unjuk Kerja Pemisah (Disconnecting Switch) di Gardu Induk 150kV Otam. Jurusan Teknik Elektro. Universitas Sam Ratulangi Manado. 1-10

Aslimeri. dkk. 2008. Teknik Transmisi Tenaga Listrik. Jakarta. Direktorat Sekolah Menengah Kejuruan

Freddy Silitonga. 2018. Sistem Proteksi Pada Pemisah Tenaga (PMS). TE.UMA

Gunawan Marco Samuel. 2013. Analisa Perancangan Gardu Induk Sistem Outdoor 150 kV di Tallasa, Kabupaten Takalar, Sulawesi Selatan. JURNAL DIMENSI TEKNIK ELEKTRO Vol. 1, No. 1. 37-42.

Kadir Abdul. 1989. Transformator.Jakarta. PT Elex Media Komputind.

Koerniawan Tony. 2019. Kajian Ketelitian Current Transformer (CT) Terhadap Kesalahan Rasio Arus pada Pelanggan 197 kVA. Energi dan Kelistrikan: Jurnal Ilmiah Vol. 11, No. 1. 9-16

Muliadi Dkk. 2022. Pengaruh Tingkat Kelembaban Terhadap Kinerja Pemisah (PMS) 150 kV Pada Gardu Induk. Jambura Journal of Electrical and Electronics Engineering Volume 4 Nomor 1. 92-98

Nasution Sahnur Elvy. 2019. Rele Diferensial Sebagai Proteksi Pada Transformator Daya Pada Gardu Induk. Regional Development Industry & Health Science, Technology and Art of Life. 179-186

Ramadhan Alfianta. 2018. Analisis Keandalan Baterai Sebagai Supply Motor De Penggerak Pms Di Gardu Induk 150 Kv Kentungan. Jurnal Elektrikal, Volume 5 No. 2. 39-46

T. S. Hutauruk, 1988. Gelombang Berjalan dan Proteksi Surja. Erlangga. Jakarta.

Tobing Bonggas L. 2003. Peralatan Tegangan Tinggi Jakarta Gramedia Pustaka Utama..

Wahyuni. 2021. Pentingnya Kualitas Trafo Arus Dengan Menerapkan Quality Plan Dalam Proses Assembly. TE. UNPRI.

Yusniati. 2019. Analisis Kinerja Circuit Breaker Pada Sisi 150 Kv Gardu Induk Lamhotma. SEMNASTEK UISU 7

Downloads

Published

2024-05-31

How to Cite

Dede Eful Ginanjar, & Irwanto Irwanto. (2024). Pemeriksaan Serta Pemeliharaan Pada Rel 1 Bay Saketi. Jurnal Elektronika Dan Teknik Informatika Terapan, 2(2), 77–82. https://doi.org/10.59061/jentik.v2i2.673

Issue

Vol. 2 No. 2 (2024): Juni : Jurnal Elektronika dan Teknik Informatika Terapan ( JENTIK )

Section

Articles

License

Copyright (c) 2024 Jurnal Elektronika dan Teknik Informatika Terapan

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Most read articles by the same author(s)