Peranan Teknologi Mesin Elektrolizer sebagai Penghasil Sodium Hyphochlorite pada Pembangkit PT.Indonesia Power UJP PLTU Banten 2 Labuan

Fitriani Fitriani; Siswo Wardoyo

doi:10.59061/jentik.v2i4.870

Authors

Fitriani Fitriani Universitas Sultan Ageng Tirtayasa
Siswo Wardoyo Universitas Sultan Ageng Tirtayasa

DOI:

https://doi.org/10.59061/jentik.v2i4.870

Keywords:

Electrolizer, Condenser, Sodium Hypochlorite, Electrolisis, PLTU

Abstract

This research aims to discuss electrolyzer technology which acts as a tool that produces sodium hypochlorite or chlorine active ingredient. Sodium hypochlorite functions as an active ingredient that can weaken and neutralize microorganisms so that the cooling channel (condenser) is protected from the proliferation of marine life that can inhibit the channel. The research method carried out is explanatory descriptive research, while the method of data collection is carried out through observation and interviews with related parties. The process carried out to make sodium hypochlorite or chlorine products begins with seawater entering the sea water tank, sea water booster pump, sea water strainer, electrolyzer, sodium hyphochlorite tank, continuous dosing pump, shock dosing pump and finally injection intake area. The main tool used to produce sodium hypochlorite is an electrolyzer, this tool functions as a separator of seawater compounds to be used as sodium hypochlorite or chlorine active ingredient. The results showed that the electrolyzer technology produces active ingredients that can weaken marine biota to prevent blockages in the condenser channel. The existing cooling system works optimally so that the plant avoids overheating.

References

Arianto, J., Perbani, N. M. R. R. C., & Kusumah, M. F. P. (2018). Analisis luas dan volume sedimen pada kanal intake untuk menjaga ketersediaan pasokan air (Studi kasus: PLTGU Muara Tawar, Bekasi Utara). Jurnal Rekayasa Hijau, 2(1), 80–89. https://doi.org/10.26760/jrh.v2i1.2045

Bawotong, V. T. (2015). Rancang bangun uninterruptible power supply menggunakan tampilan LCD berbasis mikrokontroler. E-Journal Teknik Elektro dan Komputer, 1–7.

Chamdareno, P. G., & Hidayat, H. N. (2021). Studi kelayakan pengoperasian chlorination plant B setelah mengalami kerusakan pada liner 4 busbar PT Indonesia Power Pro POMU. RESISTOR (Elektronika Kendali Telekomunikasi Tenaga Listrik Komputer), 4(1), 17. https://doi.org/10.24853/resistor.4.1.17-22

Fuazen, F., Iqbal, U., & Sarwono, E. (2019). Analisa sistem kinerja booster pump di Sepakat 2 A. Yani cabang PDAM Tirta Khatulistiwa, Jalan Imam Bonjol, Pontianak Selatan, Kota Pontianak, Kalimantan Barat. Suara Teknik: Jurnal Ilmiah, 1(1). https://doi.org/10.29406/stek.v10i2.1547

Linarwati, M., Fathoni, A., & Minarsih, M. M. (2016). Studi deskriptif pelatihan dan pengembangan sumber daya manusia serta penggunaan metode behavioral event interview dalam merekrut karyawan baru di Bank Mega Cabang Kudus. Journal of Management, 2(2), 1–8.

Ramadhan, A. (2017). Analisa keandalan kondensor dengan menggunakan debris filter di PLTU Belawan. Jurnal Surya Teknika, 5(02), 18–24. https://doi.org/10.37859/jst.v5i02.640

Rido Rahmadani. (2020). Analisis pemasangan filter pasif untuk mengurangi harmonisa pada transformator rectifier di PT. Indah Kiat Pulp and Paper Perawang. SainETIn, 3(2), 59–68. https://doi.org/10.31849/sainetin.v3i2.3083

Rofandi, M. N., & Irwanto. (2022). Sistem kerja electrostatic precipitator (ESP) untuk menangkap abu hasil proses pembakaran di PLTU PT. Dian Swastatika Sentosa Serang Power Plant. G-Tech: Jurnal Teknologi Terapan, 6(2), 376–386. https://doi.org/10.33379/gtech.v6i2.1743

Sukarno, A., Bono, B., Prasetyo, B., Program, M., Teknik, S., Energi, K., Teknik, J., Polines, M., Staf Pengajar Program, M., & Sudarto, J. H. (2014). Analisis perubahan tekanan vakum kondensor terhadap kinerja kondensor di PLTU Tanjung Jati B Unit 1. EKSERGI Jurnal Teknik Energi, 10(2), 65–71.

Sulaeman, O. (2018). Desain pengolahan air menggunakan membran ultrafiltrasi kapasitas 50M3/hari. Jurnal Rekayasa Lingkungan, 11(1), 37–44. https://doi.org/10.29122/jrl.v11i1.3025

Susanto, A., Rubiono, G., & Bunawi. (2016). Pengaruh variasi luas permukaan plat elektroda dan konsentrasi. Jurnal Prodi Teknik Mesin Universitas PGRI Banyuwangi, 1(1), 1–6.

Suyuty, A. (2011). Studi eksperimen konfigurasi komponen sel elektrolisis untuk memaksimalkan pH larutan dan gas hasil elektrolisis dalam rangka peningkatan performa dan reduksi SOx - NOx motor diesel. ITS Undergraduate, 1–14.