Pembuatan Dan Karakterisasi Komposit Hibrid Kayu Plastik Dari Limbah Kayu Kelapa Sawit Dan Serat Tandan Kosong Bermatrik Polipropilena

Tulus Swasono; Yudi Dwianda

doi:10.59061/jsit.v2i1.123

Authors

Tulus Swasono Politeknik Kampar
Yudi Dwianda Politeknik Kampar

DOI:

https://doi.org/10.59061/jsit.v2i1.123

Abstract

The potential for waste of oil palm wood from company plantations and community gardens after passing its productive age is very large, as well as the waste resulting from processing oil palm in the form of empty fruit bunches. The need for natural wood should be reduced by using wood substitute materials, one of which is wood plastic composite, which uses plastic as a matrix and wood as reinforcement. In order to obtain a hybrid composite with reinforces in the form of palm sawdust and empty bunch fiber as well as a polypropylene matrix with mechanical and physical properties that meet the standard criteria, composite manufacture and characterization were carried out.

References

Anonymous. (2002). “Wood Plastic Composite: a technical review of material, process and application”. Tangram Technology Ltd. UK.

Bakar, E.S. (2003). “Kayu sawit sebagai substitusi kayu dari hutan alam”. Forum Komunikasi dan Teknologi dan Industri Kayu 2 : 5-6. Bogor.

Balfas, J. (2003). “Potensi kayu sawit sebagai alternatif bahan baku industri perkayuan”. Seminar Nasional Himpunan Alumni IPB dan HAPKA Fakultas Kehutanan IPB Wilayah Regional Sumatera, Medan.

Clemons, C.M. (2002). “Wood-plastic composites in the United States”. Forest Products Journal. 52(6): 10-18.

Erwinsah. (2009). Kepala Kelompok Peneliti Rekayasa Teknologi dan Pengelolaan Lingkungan, Pusat Penelitian Kelapa Sawit (PPKS). Medan.

Febrianto, F. Setyawati, D. Karina, M. Bakar, E.S dan Hadi, Y.S. (2006). “Influence of wood flour and modifier contents on the physical and mechanical properties of wood flour-recycle polypropylene composite”. Department of Forest Products, Faculty of Forestry, Bogor Agricultural University, Indonesia.

Han, G.S; Ichinose, H, Takase, S, dan Shiraishi, N. (1989). “Composites of wood and polypropilene III”. Mokuzai Gakkaishi 35 (12): 1100-1104.

Haygreen, J.G dan Bowyer, J.L. (1996). “Hasil hutan dan ilmu kayu”. Gadjah Mada University. Yogyakarta.

Iswanto, A.H. (2005). “Upaya pemanfaatan serbuk gergaji kayu sengon dan limbah plastik polyprophylena sebagai langkah alternatif untuk mengatasi kekurangan kayu sebagai bahan bangunan”. Jurnal Komunikasi Penelitian 17(3): 24-27.

Lubis, M.J, Risnasari I, Nuryawan A and Febrianto F. (2009). “Kualitas papan komposit dari limbah batang kelapa sawit (elaeis guineensis jacq) dan polyethylene (PE) daur ulang”. Jurnal Tek. Ind. Pertanian. Vol. 19(1): 16-22.

Maloney, T.M. (1993). “Modern Particleboard and Dry Process Fiberboard Manufaturing”. Miller Freeman Publication. USA.

Marutzky, R. (2004). “Wood plastic composite”. Wilhelm Klauditz Forum Ausgabe 5, jun 2004.

Nuryawan, A; Massijaya, M.Y dan Hadi, Y.S. (2008). “Sifat fisis dan mekanis Oriented Strand Board (OSB) dari akasia, ekaliptus dan gmelina berdiameter kecil: Pengaruh jenis kayu dan macam aplikasi perekat”. Jurnal Ilmu dan Teknologi Hasil Hutan 1(2): 60-66.

Syarief, R; Santausa, S dan Isyana, S.T. (1999). “Teknologi pengemasan pangan”. Laboratorium Rekayasa Proses Pangan. PAU Pangan dan Gizi. IPB, Bogor.