Analisis Manajemen Risiko pada Pekerja Pabrik yang ada di Kabupaten Brebes

Dila Lailatul Munawaroh; Amirah

doi:10.59061/masip.v3i4.1286

Authors

Dila Lailatul Munawaroh Universitas Pancasakti Tegal
Amirah Universitas Pancasakti Tegal

DOI:

https://doi.org/10.59061/masip.v3i4.1286

Keywords:

Brebes Regency, Ergonomics, Factory Workers, Occupational Safety Health, Risk Management

Abstract

The manufacturing industry in Brebes Regency employs a large workforce and has high occupational safety and health risks, requiring the implementation of systematic risk management. This study aims to analyze the implementation of risk management among factory workers in Brebes Regency based on the stages of risk identification, measurement, and management. The study used a quantitative descriptive approach with 100 respondents from three companies. Data were collected through a five-point Likert questionnaire consisting of 39 statements and analyzed using average scores with categories of Poor (1.00–<2.50), Fair (2.50–<3.50), and Very Good (3.50–5.00). The results show that the average indicator value is in the range of 3.96–4.71, so that all indicators are in the Very Good category, with an average risk identification aspect of 4.48, risk measurement of 4.43, and risk management of 4.50. The highest scores were for recording personal property loss (4.71) and awareness of noise hazards (4.56), while the lowest scores were for assessing muscle complaints/minor injuries due to work posture (3.96) and work position and short break arrangements (4.33). Overall, the implementation of risk management has been very good, but strengthening of the ergonomics aspect is still needed through more formal recording of complaints, periodic observation of posture and workload, and ergonomic interventions so that the implementation of risk management is more balanced and sustainable.

References

Ayuningtyas, A. D. (2024). Ada berapa kecelakaan kerja di Indonesia sepanjang 2023? GoodStats. https://goodstats.id/article/sepanjang-2023-ada-berapa-kecelakaan-kerja-di-indonesia-HbHEX

Badan Pusat Statistik. (2023). Jumlah angkatan kerja (jiwa), 2022. https://brebeskab.bps.go.id/id/statistics-table/2/NDEjMg%3D%3D/jumlah-angkatan-kerja.html

Badan Pusat Statistik. (2024). Statistik industri manufaktur besar dan sedang Provinsi Jawa Tengah 2022. https://jateng.bps.go.id/id/publication/2024/12/18/d1f372e82d4b7fd2143d2dbc/statistik-industri-manufaktur-besar-sedang-provinsi-jawa-tengah-2022.html

Devi, N. L. P. M. L., Arnita, N. P. S., & Muryanifa, M. (2023). Analisis faktor risiko ergonomi pada pekerja pembuat jajan sengait di Desa Sading, Mengwi, Badung. OBAT: Jurnal Riset Ilmu Farmasi dan Kesehatan, 1(6), 89–96. https://doi.org/10.61132/obat.v1i6.134

Hidayat, I. P., & Siswoyo. (2020). Analisis risiko kesehatan dan keselamatan kerja pada proyek pembangunan perumahan di Sidoarjo, Jawa Timur. Jurnal Rekayasa dan Manajemen Konstruksi, 8(1), 35–44. https://doi.org/10.30742/axial.v8i1.1025

International Organization for Standardization. (2018). ISO 31000: Risk management—Guidelines. ISO.

Mayasari, D., & Susilowati, I. H. H. (2022). Analisis faktor risiko ergonomi terhadap keluhan gangguan muskuloskeletal pada pekerja UMKM pengrajin alas kaki di Kecamatan Ciomas. National Journal of Occupational Health and Safety, 3(5). https://doi.org/10.59230/njohs.v3i1.6039

Muflihah, S., & Pudjihardjo, H. S. (2019). Analisis manajemen risiko keselamatan dan kesehatan kerja (K3) pada proyek pembangunan gedung di Semarang. Teknika, 54–64. https://doi.org/10.26623/teknika.v14i2.1805

Ramli, S. (2010). Pedoman praktis manajemen risiko dalam perspektif K3 (OHS risk management). Dian Rakyat.

Rawung, P. B., Kawatu, P. A. T., & Mantjoro, E. M. (2025). Analisis bahaya dan risiko keselamatan dan kesehatan kerja pada pekerja di bagian instalasi gizi RSU GMIM Bethesda Tomohon. PREPOTIF: Jurnal Kesehatan Masyarakat, 9(2), 5214–5226. https://doi.org/10.31004/prepotif.v9i2.48866

Rina, D. N., & Rachmawati, S. (2022). Analisis risiko kesehatan pajanan benzena pada pekerja di laboratorium PT X. PREPOTIF: Jurnal Kesehatan Masyarakat, 6(1), 762–767. https://doi.org/10.31004/prepotif.v6i1.3726

Setyadi, N. H., Barung, T. P., & Hamijaya, P. D. N. (2025). Analisis manajemen risiko pada proses PT Multiply Sarana Indotama dengan metode human reliability analysis dan HAZOP. Jurnal Manajemen Risiko, 6(1), 107–123. https://doi.org/10.33541/mr.v6i1.7003

Siallagan, F. (2024). Kemnaker: Angka kecelakaan kerja tinggi, di 2023 lebih dari 370 ribu kasus. Indoposco. https://indoposco.id/2024/12/05/kemnaker-angka-kecelakaan-kerja-tinggi-di-2023-lebih-dari-370-ribu-kasus/

Tarwaka. (2015). Keselamatan dan kesehatan kerja: Manajemen dan implementasi K3 di tempat kerja. Harapan Press.

Wartini, Sartika, I., Haryanti, T., & Ani, N. (2024). Alat pelindung diri sebagai upaya mencegah risiko pada pekerja sablon plastik di Desa Bolon, Kecamatan Colomadu, Kabupaten Karanganyar, Jawa Tengah. Jurnal SOLMA, 13(1), 402–408. https://doi.org/10.22236/solma.v13i1.13146

World Health Organization. (2024). WHO/ILO joint estimates of the work-related burden of disease and injury, 2000–2016. https://www.who.int/news-room/questions-and-answers/item/total-who-ilo-joint-estimates-of-the-work-related-burden-of-disease-and-injury--2000-2016