Analisis Pengendalian Kualitas Produk Dominan Produksi Printing Menggunakan Metode Control Chart Di PT. Sari Warna Asli Unit 1 Karanganyar
DOI:
https://doi.org/10.59061/repit.v1i3.345Keywords:
Quality Control, Control Chart, ProductionAbstract
Quality control is very necessary so that the goals, plans and policies of a company in producing products are achieved. This study aims to analyze the dominant product quality control in printing production (kain sarung with construction (TR30/TR30 84 55 52)) using the control chart method at PT. Sari Warna Asli Unit 1, Karanganyar. Data collection through interviews and data processing of inspection reports. The results of data analysis obtained UCL values ??of 753, CL of 675, and LCL of 597. Gagal wanra is a defect with the highest number and is outside the control limits. The causes of these defects come from environmental factors, methods, machines, humans, and raw materials.
References
Ariani, D. W. (2008). Pengendalian Kualitas Statistik (Pendekatan Kuantitatif dalam Manajemen Kualitas). Yogyakarta: Andi.
Chen, Y. C., & Lu, M. T. (2018). A Modifed Shewhart Control Chart with A Variable Sample Size For Monitoring Autocorellated Quality Characteristics. Journal of The Chinese Institute of Industrial Engineers, Vol 35. No. 2, 132-141.
Defeo, J. A. (2018). Juran's Quality Handbook: The Complete Guide to Performance Excellence (7th ed.). New York: McGraw Hill.
Ivanda, M. A., & Suliantoro, H. (2018). Analisis Pengendalian Kualitas dengan Metode Six Sigma Pada Proses Produksi Barecore PT. Bakti Putra Nusantara. Industrial Engineering Online Journal, 7 (1).
Mikhalin, A., & Suseno, A. (2022). Analisis Pengendalian Produk Cacat dengan Metode Control Chart Pada PT. Kawai Plant 1. Journal of Mechanical Engineering, Manufactures, Materials and Energy, Vol 6. No. 1, 48-55.
Nadiyah, K., & Dewi, G. S. (2022). Quality Control Analysis Using Flowchart, Check Sheet, P-Chart, Pareto Diagram and Fishbone Diagram. OPSI, Jurnal Optimasi Sistem Industri, Vol 15. No. 2, 183-188.
Wahyuni, H. C., & Sulistiyowati, W. (2020). Pengendalian Kualitas Industri Manufaktur dan Jasa. Sidoarjo: UMSIDA Press.
Walujo, D. A., Koesdijati, T., & Utomo, Y. (2020). PENGENDALIAN KUALITAS. Surabaya: Scopindo Media Pustaka.
