Analisis Manajemen Persediaan Bahan Dengan Material Requirements Planning Metode Lot Sizing (Studi Kasus : PT Madubaru PG Madukismo)
DOI:
https://doi.org/10.59061/repit.v1i3.373Keywords:
Perencanaan bahan baku, Lot Sizing, MRP, EOQ dan POQAbstract
PT Madubaru PG Madukismo is one of the sugar companies in Padokan, Tirtonirmolo, Kasihan, Bantul, Yogyakarta. In its production needs in one process the production machine covers a capacity of 30,000 quintals per day. The need for sugar for consumers per month is 11,816 tons with sugarcane as much as 164,165 tons, but because PT Madubaru Madukismo has limited land available only 230,000 tons, the company takes from farmers directly to meet its production capacity. In 1 truck, the average can load 56 quintals / truck, it also depends on the condition of the truck and the condition of the sugarcane. from June to November 2022, there was a shortage of raw material stocks of 754,990 tons and a shortage of additional materials of 301,595 liters from June to November from the need for use of 361,914 liters. So using engineering techniques in Material Requirement Planning can be used in planning the amount and scheduling of raw material needs in the company, because it can produce two very important decisions, namely in the form of lots to be ordered and when is the right time to place an order. Techniques that can be used for raw material scheduling, one of which is by using the Material Requirement Planning (MRP) method or raw material inventory planning system, Economic Order Quantity (EOQ) and Period Order Quantity (POQ) where from these methods which is more effective for determining future raw material scheduling.
References
Aprillia Susmita, Babay Jutika Cahyana. 2018. Pemilihan Metode Permintaan dan Perencanaan Kebutuhan Bahan Baku Dengan Metode MRP di PT. XYZ. [Open Jurnal]. Al Kamal. Institut Saint Dan Teknologi, Jurusan Teknik Industri: Jakarta.
Farida., Agustina, A. Analisis Perencanaan dan Pengendalian Persediaan Bahan Baku Chip Berdasarkan Sistem MRP pada PT. Indonesia Toray Synthetics. [Open Jurnal]. Universitas Mercu Buana. Fakultas Teknik, Program Studi Teknik Industri: Jakarta.
Koeswara, S., Suhada, R, S. 2010. Perencanaan Kebutuhan Material (MRP) dengan Menggunakan Teknik Lot Sizing pada Bahan Baku Brispack J Varnish. [Open Jurnal]. Jakarta: Universitas Mercu Buana. Fakultas Teknik, Program Studi Teknik Industri.
Miclo, R. et al. (2018), “Demand Driven MRP: assessment of a new approach to materials management”, International Journal of Production Research, Vol. 57, No. 1. DOI:10.1080/00207543.2018.1464230
Muhammad Kholil, Hendri, Saiful Munajat. 2019. Analysis Of Inventory Control Planning For P-200 Chip (Semi Dull) Using Material Requirements Planning (MRP) Method At PT. Indonesia Toray Sintetic. Thesis/Dissertation. Jakarta Barat: Teknik Industri. Universitas Mercu Buana.
Purwati, Sri. 2008. Analisis Peranan MRP (Material Requirement Planning) Untuk Produk Kursi Benelux Pada CV Aksen Rattan Cirebon. Skripsi. Fakultas Bisnis danManajemen,Universitas Widyatama.(2018) http://dspace.widyatama.ac.id/handle/10364/981.
Siti zahrotun uyun, Adi indrayanto. 2020. Analisis Pengendalian Persediaan Bahan Baku Dengan Menggunakan Metode MRP (Material Requirements Planning). [Open Jurnal]. Universitas Jendral Soedirman. Fakultas Ekonomi dan Bisnis, Jurusan Manajemen: Purwokerto.
Wahyu Purnama Alam. 2018. Perencanaan Persediaan Bahan Baku Wajan dengan Metode MRP (Material Requirerement Planning ) Pada Perusahaan Cor Alumunium Bintang Dua Di Kec. Cekoneng, Kab. Ciamis. [Jurnal]. Universitas Galuh. Fakultas Teknik, Program Studi Teknik Industri: Ciamis.
Wilson Florim, Paulo Dias, Andre S. Santos, Leonilde R. Varela, Ana M. Madureira, Goran D. Putnik. 2019. Analysis of Lot Sizing Methot’s Suitability For Different Manufacturing Application Scenarios Oriented To MRP And JIT/Kanban Environment. Skripsi. Polytechnic Institute Of Porto :Portugal.
