Analisis Pengendalian Kualitas Produk Base Plate Kereta Api Dengan Menggunakan Metode Seven Tools Di PT Sinar Semesta

Authors

  • Ahmad Sobirin Universitas Teknologi Yogyakarta
  • Ari Zaqi Al Faritsy Universitas Teknologi Yogyakarta

DOI:

https://doi.org/10.59061/repit.v1i3.357

Keywords:

Base Plate, Defect, Quality, Seven Tools Quality

Abstract

PT Sinar Semesta is an industrial company engaged in metal casting, one of which is Base Plate which is located on Jl. Raya Solo-Yogya Km. 26 Klepu, Ceper, Klaten. The problem that arises at PT Sinar Semesta is product quality that needs to be improved so that it can compete with other products on the market. Therefore to improve product quality, PT Sinar Semesta needs to be directly supported by all parties in the company and all operators, especially the production operators. This study used the Seven Tools Quality with the results of the research that in January - December 2021 PT Sinar Semesta produced 2091 Base Plate products, with a total of 301 defects. There were three types of defects studied in January - September 2021, namely perforated with 95 defects in Base Plate products, porous  defects with 139 defects, and rough surface defects with 67 defects with a defect percentage of 31.56%, 46, 17%, and 22.26%.

References

Dewangga, A., & Suseno, S. (2022). Analisa Pengendalian Kualitas Produksi Plywood Menggunakan Metode Seven Tools, Failure Mode And Effect Analysis (FMEA), Dan TRIZ. Jurnal Teknologi dan Manajemen Industri Terapan, 1(3), 243-253.

Hamdani, H., Wahyudin, W., Putra, C. G. G., & Subangkit, B. (2021). Analisis Pengendalian Kualitas Produk 4L45W 21.5 MY Menggunakan Seven Tools dan Kaizen. Go-Integratif: Jurnal Teknik Sistem dan Industri, 2(02), 112-123.

Handoko, A. (2018). Implementasi pengendalian kualitas dengan menggunakan pendekatan PDCA dan seven tools pada PT. Rosandex Putra Perkasa Di Surabaya. Calyptra, 6(2), 1329-1347.

Manan, A., Handika, F. S., & Nalhadi, A. (2018). Usulan pengendalian kualitas produksi benang carded dengan metode Six Sigma. Jurnal INTECH Teknik Industri Universitas Serang Raya, 4(1), 38-44.

Noviora, D., & Imam, S. (2022, December). Analisis Pengendalian Kualitas Kemasan X Dengan Menggunakan Metode Seven Tools, Fmea, Dan Analisis 5w+ 1h (Studi Kasus: Pt Xyz). In Proceeding Seminar Nasional Tetamekraf (Vol. 1, No. 1, Pp. 580-587).

Somadi, U. (2019). PENGENDALIAN KUALITAS STARTER CLUTH DALAM UPAYA MENGURANGI PRODUK DEFECT DI PT XYZ: PENDEKATAN DMAIC.

Downloads

Published

2023-08-02

How to Cite

Ahmad Sobirin, & Ari Zaqi Al Faritsy. (2023). Analisis Pengendalian Kualitas Produk Base Plate Kereta Api Dengan Menggunakan Metode Seven Tools Di PT Sinar Semesta. Jurnal Rekayasa Proses Dan Industri Terapan, 1(3), 102–115. https://doi.org/10.59061/repit.v1i3.357

Similar Articles

1 2 > >> 

You may also start an advanced similarity search for this article.